Geyser Prices Cape Town

Standard hours commonly run R450 to R950, and most contractors credit it against the repair if you proceed on the same visit. After hours roughly doubles it, and weekends and public holidays are higher again. A call-out quoted well above that range, with no credit against the work, is worth questioning.

Indicatively R8,500 to R16,000 for a 150 litre cylinder supplied, fitted and certificated, and R10,500 to R19,000 for 200 litres. The spread is driven mostly by access and by how much of the old installation has to be brought up to current standards.

Broadly R850 to R2,200 supplied and fitted, depending on element type and kW rating. Adding the thermostat in the same visit typically brings the total to R1,200 to R2,800, which is far cheaper than doing them separately.

Usually because they are quoting different jobs. One includes the valve set, the drip tray, the certificates and disposal of the old cylinder; another quotes the cylinder and labour and adds the rest afterwards. Compare inclusions before comparing figures.

A useful rule of thumb is the repair cost against the cylinder's remaining years. Spending R5,000 on valves and labour on a fourteen-year-old geyser is roughly R5,000 for a year or two. The same R5,000 on a six-year-old cylinder buys most of a decade. Ask the contractor for the cylinder's age off the plate before deciding.

Only where the contractor is registered for VAT, and not every small operator is. It is a 15% difference between two otherwise identical quotes, so confirm it rather than assuming.

Usually up to the insurer's allowance for a standard replacement, less your excess. Where current standards require upgrades the old installation did not have, that difference is generally treated as betterment and paid by you.

Typically a thermostat replacement, or a diagnosis that turns out to be a tripped breaker or a switched-off isolator. Checking the isolator and the distribution board before calling anyone out costs nothing and occasionally solves it.

Cylinder only, broadly R4,500 to R9,500 depending on brand, grade, pressure rating and warranty. Supplied and fitted with valves, labour and certificates, R8,500 to R16,000 is the usual range in Cape Town.

The cylinder difference is usually modest, often a thousand rand or two, and the installation cost is similar. That is why upsizing from 100 L to 150 L at replacement time is frequently better value than keeping the smaller unit.

There is no single answer, and this site does not endorse a brand. Parts availability, warranty terms on the specific model, the grade within a range and the pressure rating matter more in practice than the badge. Kwikot, Heat Tech and Franke are all widely fitted in Cape Town.

Brands sell several grades, and the entry grade can have a thinner cylinder and a shorter warranty than the flagship of the same range. Ask for the model and the warranty in writing rather than just the brand name.